TRC Ford Focus MK2.5 ST225 Rear Finned Diffuser

TRC Ford Focus MK2.5 ST225 Rear Finned Diffuser

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat. This diffuser fits into place and requires the use of the two original fixings. This product may require some trimming / sanding to ensure the perfect fit and we advise for the perfect finish to have the product sprayed gloss black. Fitting guidance 1 - Make sure the clips are sanded down to a thickness of around 4mm max2 - Lube up the clip area on the cars bumper, all the way around the clip section (WD40)3 - Take a blunt screw driver or such like to the clip section on the bumper and prise open the clips holes (don’t worry they shouldn’t break,  the plastic clip section on the bumper will form its original shape once you have fitted the diffuser) Doing this will help the clips slotting in as they are bigger than the original clips4- Start from one end of the diffuser, you will notice once a few clips are in it will become a bit tougher, as you get to the tight/tougher area of the diffuser you’ll need a hand pushing from behind the bumper and the other pushing against the diffuser, forcing the diffuser into the bumper5- If the clips look like are not lining up, lift the diffuser upwards whilst still pushing against the bumper.You may need to repeat step 5 for all the clips across the top seciton of the diffuser, the more clips you get in the easier it becomes and it should end up in place towards the last few clips. Please try to ignore the fact it looks like it doesn’t fit.. It doesWe understand these diffusers can be harder to fit than most of our products so please get in touch if any help fitting is required?

Need help fitting? 

We have a fitting guide page that talks you through the fitting steps

We take great care packaging every item to ensure safe shipment to you. Our postage and courier charges not only cover the shipping cost, but also the time to pack your order, plus packaging supplies etc. Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, Any KW, AB30-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes.