Hubcentric wheel spacers 1 Pair To Fit Lexus GS300 5x114.3 60.1 30mm - UK MADE

1 PAIR

30mm Hubcentric Wheel Spacers

5x114.3 with 60.1 centre bore

Designed to fit

vehicles with M12x1.5 studs

Please note you may need to cut your factory studs as the normal stud length is approx. 24mm

Most of the time you may well find that stud length may well sit inside the rear of a lot of wheel designs

As many wheels have a hollow or concave rear to the hub area

Please check this when fitting the spacer

PCD / BOLT PATTERN 5x114.3

CENTRE BORE SIZE 60.1mm

These wheel spacers are a great fit giving that Euro look to your car or for getting the offset correct on a pair of wheels

They are designed to fit directly onto your original wheel hub using the nuts supplied in the kit

The wheel is then attached to the spacer using your original nuts

The spacer has a centre bore to match the hub to ensure a perfect fit

This is a complete set (1 pair) of wheel spacers, If you need to do all 4 wheels you will need to buy 2 PAIRS

Fitting advice

Please ensure that you use a qualified fitter to have these put onto

your vehicle if you intend to use them for road use. We advise that you take

the item to your local M.O.T garage.

Although some of our products may seem simple to fit

we do always advice that you have them installed by a qualified fitter and wait

to receive the item before making arrangements for the fitting of the item. We

also advice that you contact your insurance company to ensure the modifications

you are planning to make to the vehicle does not void your policy. We can not

be held accountable if you are not a qualified fitter and you damage the item

in any way, if you have booked the fitting before receiving the item or if you

do not inform your insurance company of the modification and your insurance is

voided.