AIRTEC Intercooler Upgrade To Fit MONDEO MK3 2.0/2.2 TURBO DIESEL

This huge Intercooler will

reduce those much needed ACT?s (Air charge Tempertures) and help increase power

and save fuel due to the original ford Intercooler being to small to cope!

Test figures for standard & Modified Mondeo

Diesel test cars now available.

Now Instock.

TECHNICAL

DATA

Airtec Mondeo Mk3 2.0/2.2

Turbo Diesel front mount Intercooler (comes with full brackets and fittings

included) Airtec?s latest creation is this intercooler for the Mondeo 2.0 &

2.2 Turbo diesels, they have now changed the total design with new high

flow 60mm core and Angled flow end tanks, which in turn has increased

power, torque & also lowered ATC Temps, Yes its really that good.

BHP & Torque gains on Standard car fitted with Airtec Intercooler

upgrade, Rolling road carried out @ AMD.  (Gains. 5.2 bhp

increase & we saw the torque rise by a massive 31.5 lb/ft , this

figure will be easily doubled when fitted to a remapped Mondeo.)

Test results from Street Performance?s Modified Mondeo Diesel.  Mods on

car are : -Free Flow exhaust & decat -Pipercross panelfilter -Massive

Airtec Intercooler upgrade -Custom map up to 3.3k rpm

Street Performance?s Modified Mondeo made 208bhp & 441 lbft of torque! with

the above mods.

Quotes by David @ Street Performance  Figures are very good, even without

map it does 173hp instead of 155hp.With mapping we saw the power

rise up to 208hp. We did limit the car?s torque for more pull tru revs

& as smooth power curve as possible (but will be raised 10-20Nm

after some more fiddling with the map! along with 220+hp to make ST220/ ST225

owners jealous, with same or better performance with 40-50MPG   They also

tested 2 cars to see what the Intake Air charge tempertures were

under load, a Complete standard car and street performance?s modified Mondeo,

Both cars tested with 8 degrees Ambient  Air temps,  Results ?

Completely Standard car under load, the Intake tempertures kept rising up to

55-60° and above! Fully tuned car with the Airtec Intercooler fitted and

the Intake temps never went higher then 15°, so IC works very well and gives

much less stress on engine.

Approximate Dimensions:

Height 350mm

Width 685mm

Thickness 60mm

AIRTEC part no: ATINTFO14

Fitting advice

Although some

of our products may seem simple to fit we do always advice that you have them

installed by a qualified fitter and wait to receive the item before making

arrangements for the fitting of the item. We also advice that you contact your

insurance company to ensure the modifications you are planning to make to the

vehicle does not void your policy. We can not be held accountable if you are

not a qualified fitter and you damage the item in any way, if you have booked

the fitting before receiving the item or if you do not inform your insurance

company of the modification and your insurance is voided.