-500x500.jpg "BRAX GRAPHIC GL3 midrange driver 100W \"MicroSphere\" Ceramic 80mm/3 inch High end car speaker")
BRAX GRAPHIC GL3 midrange driver 100W "MicroSphere" Ceramic 80mm/3 inch High end car speaker
BRAX GRAPHIC GL3 midrange driver 100W "MicroSphere" Ceramic 80mm/3 inch High end car speaker
BRAX GRAPHIC GL3
It all started with the vision of music lover and company founder Heinz Fischer to be the first provider to bring the grandiose audio experience of legendary high-end hi-fi components into cars. Uncompromising in design, technology and sound. True to this guiding principle, the focus of the new development of our BRAX GRAPHIC loudspeaker series was on pure, unadulterated music reproduction, consistently implemented with the latest technologies and the highest quality materials - of course Made in Germany.
A perfect team with maximum tonal harmony
The high-end GL3 cone-midrange driver is the next member of the successful BRAX GRAPHIC speaker series and the ideal supplement for unusual three-way constellations in combination with the GL1 tweeter and GL6 mid-bass driver. Its lively, dynamic sound characteristics and its particularly wide frequency range predestine the GL3 for acoustic flights of fancy.
MicroSphere - the material for maximum acoustic precision
The heart of this midrange speaker is its particularly light paper cone with a modified "MicroShere" coating, which, with its extremely precise and detailed reproduction, harmonises perfectly with the other loudspeakers in the GRAPHIC series. With this patented technology, hollow ceramic microspheres with a diameter of just 75 µm are embedded in a polymer layer and applied to the membrane.
State of the art technology
The membrane is driven by a particularly linear neodymium magnet system, which is integrated into the aerodynamically sophisticated die-cast aluminum basket. The perfect ventilation of the long-throw voice coil not only ensures excellent thermal stability, but also prevents compression effects right from the start. The soft membrane suspension ensures an extremely low resonance frequency and thus the possibility of deep coupling, ideally in fully active systems.
Details thought through to the end
The attention to every detail, no matter how small, manifests the GL3 as a BRAX speaker at reference level, which always meets the highest sound demands.
As is typical for BRAX, each pair of loudspeakers is given its own serial number and recorded in a service database. This high-end product - Made in Germany - is rounded off by the packaging in an elegant wooden box, which once again underlines the philosophy of the BRAX brand.
features
Extraordinarily stiff and very light paper cone with a new "MicroSphere" coating made of
hollow ceramic microspheres, embedded in a polymer layer
Low-reflection rubber surround for balanced frequency response in the upper transmission range
Coated fabric dome (dust cap) to optimize the frequency response in the upper midrange
Aerodynamically shaped die-cast aluminum basket with optimal voice coil ventilation
Extremely precisely manufactured, ventilated neodymium magnet system for optimal linear magnetic flow
Technical specifications
Power RMS / Max. P 100 / 150 watts
(high pass > 300 Hz at 24 dB/oct.)
impedance Z 3Ω
DC resistance re 2.9Ω
frequency range 250Hz - 8,000Hz
resonant frequency Fs 80Hz
mechanical goodness sqm 2.90
electrical goodness Qes 0.29
overall grade Qts 0.26
indulgence cms 1180 µm/N
equivalent volume vase 1.95L
power factor BI 4.1 tm
Efficiency 1W/1m SPL 87dB
membrane area sd 35 cm²
moving mass Mms 3.4g
membrane material Paper cone with "MicroSphere" coating
made of hollow ceramic microspheres, embedded in a polymer layer
mechanical resistance rms 0.62kg/s
voice coil diameter O 25mm
voice coil winding width 6mm
Max. linear diaphragm stroke Xmax +/- 1.5mm
outer diameter O 92mm
installation diameter O 76mm
installation depth 35.5mm
Recommended case volumes
Closed housing with at least 250 ml net volume
net volumes Recommended DSP / amplifier settings
0.4 liters (system resonance: 200 Hz) Separation frequency: 350 Hz
Min. edge steepness: 12 dB/oct.
0.8 liters (system resonance: 155 Hz) Separation frequency: 300 Hz
Min. edge steepness: 12 dB/oct.
1.2 liters (system resonance: 140 Hz) Separation frequency: 250 Hz
Min. edge steepness: 24 dB/oct.
Note: The housing should always be completely filled with insulating material.
scope of delivery
2 x high-end cone midrange BRAX GRAPHIC GL3
1 x Allen key
1 x data sheet
We're a genuine UK based company with over 30 years experience and full back up technical knowledge Your sale is important to us whether you purchase a multi-media system or a tax disc holder you can be assured of our 100% commitment If you do not see what you are looking for please ask as we are adding new items every day Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes. Please also note that delivery times are normally 2-3 working days for these postcode regions.
BRAX GRAPHIC GL3 midrange driver 100W "MicroSphere" Ceramic 80mm/3 inch High end car speaker
- Brand: Brax - German Car Audio
- Product Code: GL3
- Availability: In Stock
-
£464.99
Tags: BRAX GRAPHIC GL3 midrange driver 100W "MicroSphere" Ceramic 80mm/3 inch High end car speaker brax, graphic, gl3, 100w, "microsphere", ceramic, high, german, audio