BRAX MATRIX ML8 SUBWOOFER Hi-End 400W Dual 2 Ohm Ceramic Microsphere Technology
BRAX MATRIX ML8 SUBWOOFER Hi-End 400W Dual 2 Ohm Ceramic Microsphere Technology
BRAX MATRIX ML8 SUB
The legendary BRAX MATRIX loudspeaker series - which has been synonymous with sound quality at the highest level for many years - is now growing with the ML8 SUB.
Developed and manufactured just as uncompromisingly as all BRAX loudspeakers, it pursues the goal of acoustic perfection
Perfection in precision
For years, our BRAX subwoofer has been the benchmark for precision and unconditionally controlled bass reproduction. The task of creating a BRAX subwoofer that reproduces uncompromisingly deep details even in the smallest possible cabinets was all the more demanding. Every component of this exceptional subwoofer is not only designed for dynamics and perfect tonality, but is also designed to convert even the highest amplifier performance into sound pressure without compression.
MicroSphere - one material for two opposing requirements
The demand for maximum stiffness of the cone combined with maximum internal damping is like squaring the circle - but the unique MicroSphere" coating, in which hollow ceramic microspheres with a diameter of only 75 µm are integrated into a polymer layer and applied to the cone, makes the impossible possible. It gives the handmade cone maximum acoustic precision for incomparable reproduction.
Timeless elegance
The clear, reduced design language is the hallmark of every BRAX product - the ML8 SUB follows this philosophy unconditionally. The combination of the finest materials is once again clearly underlined by the optionally available MR8 stainless steel ring turned from the solid, which can be used as a mounting ring or to hold the grille, depending on the installation position. Of course, the ML8 SUB is delivered in an elegant wooden box and has its own serial number, which is recorded in a service database.
features
Extraordinarily stiff, hand-made paper cone with a new "MicroSphere" coating made of hollow ceramic microspheres, embedded in a polymer layer, enables the best impulse reproduction
Specially shaped rubber surround for maximum linear cone stroke
2 x 2 Ohm double voice coil with enormous winding width for maximum cone excursion and lowest distortion
Large, protected ventilation openings in the pole core and basket ensure optimal cooling of the voice coils and minimal compression effects
Specially developed, aerodynamically optimized and particularly stable die-cast aluminum basket
Extremely powerful and precisely manufactured magnet system for an optimally linear magnetic flow
Massive connection terminals for large cable cross-sections
Technical specifications
Power RMS / Max. 400 / 800 watts
impedance Z 2 x 2Ω
DC resistance re 2 x 1.9Ω
resonant frequency Fs 32Hz
mechanical goodness sqm 9.63
electrical goodness Qes 0.60
overall grade Qts 0.56
indulgence cms 323 µm/N
equivalent volume vase 22L
power factor BI 10.3 tm
Efficiency 1W/1m SPL 85dB
membrane area sd 219 cm²
moving mass Mms 83g
membrane material Paper cone with "MicroSphere" coating
made of hollow ceramic microspheres, embedded in a polymer layer
mechanical resistance rms 1.67kg/s
voice coil diameter O 50mm
voice coil winding width 26.4mm
Max. linear diaphragm stroke Xmax +/- 9.2mm
outer diameter O 222mm
installation diameter O 191mm
installation depth 95.6mm
Recommended case volumes
closed housing Optimal case size Minimum case size
net volume 17L 10 L
Lower cutoff frequency (-3dB) 43Hz 48Hz
High pass filter DSP setting Frequency: 32 Hz
Characteristics: “Self-define”
Q factor: 1.0 Frequency: 35 Hz
Characteristic: “Self-define”
Q factor: 1.0
Bass reflex enclosure
net volume -
Reflex channel diameter O -
Reflex channel surface -
Reflex channel length -
tunnel tuning frequency color -
Lower cutoff frequency (-3dB) -
Our data for the net volumes of closed housings always refer to an unfilled housing without any insulating material. The net volumes can be reduced provided the interior of the case is completely loosely (not stuffed) filled with suitable materials.
The following materials can be used for insulation:
Polyester wadding allows a volume reduction of up to 5%
Mineral or rock wool allows a volume reduction of up to 10%
Sheep's wool enables a volume reduction of up to 20%
Note:
The insulation of bass reflex housings (if they are only used in the bass range up to 150 Hz) is counterproductive because the insulation material usually reduces the effect of the bass reflex tunnel.
scope of delivery
1 x high-end subwoofer BRAX MATRIX ML8 SUB
1 x certificate
1 x data sheet
We're a genuine UK based company with over 30 years experience and full back up technical knowledge Your sale is important to us whether you purchase a multi-media system or a tax disc holder you can be assured of our 100% commitment If you do not see what you are looking for please ask as we are adding new items every day Please note - some items may incur extra shipping charges that have to be sent by courier and are too large / expensive to be sent by Royal Mail (for example headlamps, headunits, speakers, lowering springs etc) to the following postcode areas, Channel Islands, BT, most IV, HS, KA-27-28, KW-15-17, AB30-38, AB44-56, FK17-99, G83, KW1-14, PA21-40, PH18-26, PH30-41, PH49-50, all ZE, IM, and any other non mainland postcodes.
BRAX MATRIX ML8 SUBWOOFER Hi-End 400W Dual 2 Ohm Ceramic Microsphere Technology
- Brand: Brax - German Car Audio
- Product Code: ML8 SUB
- Availability: In Stock
-
£969.99
Tags: BRAX MATRIX ML8 SUBWOOFER Hi-End 400W Dual 2 Ohm Ceramic Microsphere Technology brax, matrix, ml8, subwoofer, hi-end, 400w, dual, ohm, ceramic, microsphere, technology, german, car, audio