InCarTec FK-968/1 Ford Transit Euro 5 2013 - 2017 Double Din Stereo Fitting Kit

Complete stereo upgrade kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in a 2013 onwards Ford Transit (with no display above the radio)

This complete stereo upgrade fitting Kit includes:

Fakra to DIN antenna adapter cable (21-106)

Male Fakra to Male DIN antenna adapter cable. This cable adapts from a Farka antenna connection at the back of the cars original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket radio upgrade. This is a passive adapter cable, not suitable for cars that need a phantom power supply to turn on the antenna amplifier.

Steering wheel control interface (29-722)

Steering wheel control interface and adapter cable for Ford Transit, Transit Custom and Transit Connect vans without a separate  display above the radio.

The interface and radio adapter cable is plug and play, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip and source buttons from the steering wheel with the new radio.

PLEASE NOTE: ONLY SUITABLE FOR TRANSIT RADIOS WITHOUT THE DISPLAY ON TOP OF THE DASH

29-Series Universal patch lead (29-025)

Universal patch lead to be used with In car Tec 29- series steering wheel control interfaces.

Use for Alpine, Clarion, JVC, Kenwood, Pioneer, Sony, Zenec, Philips, Dynavin and non branded Chinese head units.

Single/Double DIN fascia (50-968)

This kit comes with a dark grey car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.

The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. The fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel. This replaces the need for a fitting cage and gives a flush professional appearance to the installation. A spare pocket is supplied for fitting a single din stereo.

PLEASE NOTE

An additional airbag light unit or blanking plate is also required. If the vehicle originally had a passenger airbag status light in the radio panel, a replacement airbag status light unit is required, failure to refit one will cause airbag warning lights to show on the instrument cluster. If the vehicle does not have a passenger airbag status light, a blanking plate is required to fill the space in the new fascia.

See the image below for examples of the components fitted into a fascia.