Brand New

JL Audio VX1000/5i VXi 5 Channel Class D Subwoofer Amplifier with DSP - 1000W

VX1000/5i
5-Channel Class D System Amplifier with Integrated DSP, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω - 14.4V

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.

Employing our second generation NexD2™ amplifier technology, the VX1000/5i efficiently powers a complete audio system.

It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 600W @ 2 ohms.

Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 600W @ 2 ohms on the subwoofer channel.

The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency.

The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology.

The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.

Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.

Amplifier includes: Power Connector (for 2 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, Subwoofer Output Connector, 6 ft A/B USB Cable

Rated Continuous (RMS) Power @ 14.4 V
Subwoofer Channel @ 4 Ω 400 W RMS x 1
Subwoofer Channel @ 2 Ω 600 W RMS x 1
Main Channels @ 4 Ω 75 W RMS x 4
Subwoofer Channel @ 1.5 Ω N/A
Main Channels @ 2 Ω 100 W RMS x 4
Subwoofer Channel @ 3 Ω 500 W RMS x 1
Main Channels - Bridged @ 4Ω 200 W RMS x 2

Rated Continuous (RMS) Power @ 12.5 V
Subwoofer Channel @ 1.5 Ω N/A
Main Channels - Bridged @ 4Ω 180 W RMS x 2
Main Channels @ 2 Ω 90 W RMS x 4
Subwoofer Channel @ 3 Ω 480 W RMS x 1
Subwoofer Channel @ 2 Ω 600 W RMS x 1
Subwoofer Channel @ 4 Ω 360 W RMS x 1
Main Channels @ 4 Ω 60 W RMS x 4

General Specifications
THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch.
Frequency Response (Main Channels) 12 Hz - 24 kHz (+0, -1dB)
Damping Factor @ 4 Ω >150 / 50 Hz
Min.Copper Power / Ground Wire Gauge 4 AWG wire
S/N Ratio, referred to highest rated power (Digital Inputs - Main Channels) 100 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Digital Inputs - Subwoofer Channel) 73 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Digital Inputs - Subwoofer Channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs - Main Channels) 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Digital Inputs - Main Channels) 81 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel) 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel) 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Input Voltage Range @ RCA Inputs 200 mV - 16 V RMS
Frequency Response (Subwoofer Channel) 12 Hz - 1 kHz (+0, -1dB)
THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch.
Damping Factor @ 2 Ω >50 / 50 Hz
Fuse Rating 80 A (AFS, AGU or MaxiFuse™)

Physical Specifications
Height (H) 2.12 in / 54 mm
Depth (D) 6.62 in / 168 mm
Net Weight 6.45 lb / 2.93 kg
Width (W) 11.32 in / 287 mm