Brand New

Kicker 42IQ10005 Q-Class 5 Channel Amplifier

The IQ1000.5 Five Channel Amplifier is an entire system in a single, stunningly simple chassis.

At under a foot long and barely two inches high, this Class D powerhouse is ready to turn your ride into a mobile concert, with all the control and customization of a professional mixer.

The IQ1000.5 delivers 65 watts x 4 at 4Ω and 125 watts x 4 at 2Ω for the AMP1 and AMP2 Channels. The SUB channel delivers 250 watts at 4Ω and 500 watts at 2Ω. See below for more details.

TWEEQ™ IT
All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.

Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.

Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth®!

IQ1000.5 Specifications
RMS Power [Watts], AMP1 and AMP2
@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 65 x 4
@ 14.4V, 2Ω stereo, ≤ 1% THD+N : 125 x 4
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 250 x 2
RMS Power [Watts], SUB channel
@ 14.4V, 4Ω mono, ≤ 1.5% THD+N : 250 x 1
@ 14.4V, 2Ω mono, ≤ 1.5% THD+N : 500 x 1
Length [in, cm]
11-15/16, 30.3
Height [in, cm]
2-1/16, 5.2
Width [in, cm]
7-9/16, 19.1
Frequency Response [Hz]
AMPS 1 and 2: 20-20k
SUB: 25-180
Signal-to-Noise Ratio [dB]
95
Input Sensitivity
Low Level: 125mV–5V
High Level: 250mV–10V
Selectable Electronic Crossover
AMP 1: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave
AMP 2: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave
SUB: Variable LP 40-180Hz, 24dB/octave
KickEQ™ Bass Boost (end panel adjustable)
Variable 0–18dB @ 40Hz
KickEQ+™ Parametric Bass Boost (Remote Control Adjustable)
Boost : Variable 0-18db
Adjustable Center Frequency : 24Hz-80Hz
Bandwidth : .5-10
Subsonic Filter
25Hz, 24dB/octave
Remote Bass
yes

Graphical User Interface Control (each channel)
Selectable Active Crossover
AMPS 1 and 2:
Variable High Pass and Low Pass 10Hz–20,000Hz
Adjustable Butterworth slope - OFF, 6, 12, 18 or 24dB/octave
Adjustable Linkwitz-Riley slope - OFF, 6 or 12dB/Octave
SUB:
Variable High Pass 10-100Hz, Variable Low Pass 40-200Hz
Ajustable Butterworth slope - OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope - OFF, 6 or 12dB/Octave
KickEQ™
Graphic 31 Band, 1/3 octave, + or - 12dB
Time Delay
Adjustable Delay : 0-20ms
Adjustable increments : .02ms, .1 ms and 1.0 ms
Compressor
Adjustable Attack and Release time; Adjustable 1:1 - 10:1 ratio
Adjustable Threshold, -80 - 10dB
Input Mixer
Maps signal inputs to specified speaker outputs

CEA Specifications
CEA Power
AMPS 1 and 2:
65 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
SUB:
250 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
CEA Signal-to-Noise Ratio
-80dB CEA-2006B (ref: 1W, A-weighted)

For more information please call us on 01245 321750